Hi! It's Thursday and that means another Stamping Bella tutorial! Today I'm sharing how I made this Card and Gift Box Set featuring The Gnome and the Mistletoe. If you are using this box to gift a set of cards, and using foam tape on the front of the cards, then I would suggest a maximum of 4 cards so they are not squashed in. The cards are not standard size, but you can adjust the measurement if you want to do standard size cards.
Supplies:
The Gnome and the Mistletoe rubber stamp (includes sentiment)
Cardstock
Designer papers (used: Maja Designs)
Stitched Circle, Stitched Pennants, and Stitched Hills Border Dies
Scoring board and bone folder
Adhesives and foam tape/dots
Magnets
How to:
Stamp 1 Gnome for the box, and 1 for each card you are putting into the box, onto white card and colour using your preferred medium. Fussy cut around the outline and set aside.
For the box base cut one piece of card measuring 8" x 8.5" and one piece measuring 4" x 8"
Cut away the outer 3 sections of each corner on the 8" x 8.5" piece, as shown. Cut the remaining 1" section horizontally and taper each side of it. Repeat this on both sides.
On the 4" x 8" piece, cut a tiny sliver of card on each side of the 2" section, up to the score line. This ensures it will fit neatly in between the score lines of the larger piece.
Front bottom, front top and back of box:
Cut one piece of white card measuring 4-7/8" x 3-7/8" (front top), another at 1-7/8" x 3-7/8" (front bottom), and another at 5-3/8" x 3-7/8" (back) Cut paper measuring 4.75" x 3.75" (front top), 1.75" x 3.75" (front bottom), and 5.25" x 3.75" (back). Round the edges at the bottom of the front top pieces and the top of the front bottom pieces. Adhere the paper to the card.
Inside:
Cut paper pieces measuring 5-3/8" x 3-7/8", 5-3/8" x 7/8" (2), and 3-7/8 x 7/8". Adhere as shown.
Outside:
Adhere the back panel in the centre.
Also cut white card for the four sections around the centre measuring 5-3/8" x 7/8" (2) and 3-7/8 x 7/8" (2). Cut paper at 5.25" x 0.75" (2) and 3.75" x 0.75" (2). Adhere the paper to the card and adhere them to the box base.
For the two outer long sections, cut paper pieces measuring 5-3/8" x 7/8" (2). Adhere as shown.
Apply adhesive to the outside of the 1" tabs and adhere them to the inside of the adjacent long section to make a box shape.
Apply adhesive to the inside of the bottom 2" section, only to the width of the side sections. Fold up the bottom and adhere to the sides, ensuring all angles are square.
If your magnets are not self-adhesive, apply a glue dot to one and adhere in the centre of the 2" bottom section, approximately 0.75" down.
Adhere the paper/card panel over the magnet, then place the other magnet sitting on it. Apply a glue dot to the top of the second magnet, fold down the top front of the box and adhere the magnet to it. Again, place a strip of double sided tape over the magnet to ensure it stays in place.
For the box and each card:
Cut stitched circles measuring 3.75" (red card) and 3.5" (paper), and cut 2 long stitched pennants - one from red card and one from contrasting paper.
Use the stitched hills border dies and white card to make snow drifts and adhere to the bottom of the stitched circles.
Finally, adhere the Gnome to the circle panel.
The matching card measures 3-7/8" x 5.25".
Card base: 3-7/8" x 10.25" - scored at 5.25"
White panel: 3-3/8" x 5" - embossed at 1/8" on all sides
Patterned paper: 2.5" x 3-3/8"
Sentiment strip: 3.25" x 0.75"
The circles panel and sentiment strip have been adhered using foam tape.
For more inspiration check out the Stamping Bella Sisterhood page over on Facebook, where you can add your own Stamping Bella creations.
My Social Media Sites
No comments:
Post a Comment